Size Range: DN40-DN1200
Pressure: PN10, PN16, 200PSI, 250PSI, 10K, 16K
Temperature Range: -20°C to +200°C (depending on different material)
Face to Face: EN558-1 20 Series, ISO5752 20 Series, API609, DIN3202 K1
Flange Standard: ISO7005-2 PN10/PN16, EN1092-2 PN10/PN16, ANSI 125/150, AS4087 PN14/PN16, JIS 10K/16K
Main Parts:
Body: Cast iron,Ductile iron,Carbon steel, Stainless steel
Disc: Ductile iron,Stainless steel,Aluminum Bronze,Duplex SS
Stem: Stainless steel, Duplex SS, Monel
Seat: EPDM, NBR(Buna N), PTFE,Viton,Natural rubber,Silicone
● The body is one-piece wafer type, suitable booted seat design, with strong strength.
● The resilient booted seat is soft seat type, isolate body and stem from line media and ensures a bubble-tight shutoff of flow media at full-rated pressure.
● Easy to replace seat, low maintenance cost design and long service life.
● Connect between disc and stem, can be pinless spline type and split stem for big sizes or with pin type.
● High Cv, lower head loss, longer lifetime with low operating torques.
● Operator can be manual hand lever, worm gear, electric actautor or penumatic actuator.
WhatsApp QR code
Note: All images on this website are intended for illustrative purposes only. If you believe any content infringes on your rights, please notify us immediately. Upon verification, we will promptly remove or replace the offending material to avoid any unintentional copyright issues.
